Updated 10-12 – SJCAM SJ4000+ 2k Gyro + SJCAM M10+ 2K Updated Firmware

Hello SJCAM Fans and Resellers,   We have updated firmware for the SJCAM SJ4000+ (SJ4000 Plus) 2K and the M10+ (M10 Plus) 2K Gyro Edition Cameras. We will be uploading changelogs shortly.   SJ4000+ 2K (SJ4000 Plus) Gyro Firmware (v2.3.1)  Link coming soon……. Currently being updated. Changelog: V2.3 1, Improves low-light exposures pictures have dots issue. V2.2 1. Burst Mode optimization: Adds 30fps option; CS indicator increased when prompted; Change English OSD “Sequence” as “Burst Mode”; Photos do not have time to repair burst watermark problems; 2, increase video resolution VGA @ 240FPS 3, increasing slow video features: Slow video options menu to add, you can choose -2X, -4X, -8X 4, repair BUG Modify WIFI connection will not automatically shut down when the low battery problems; Modify the English OSD “stabilization” as “Burst Mode”, “anti-shake” for the “gyroscope stabilization”; When modifying connection APP, WIFI probability time watermark picture has broken then crash problem; When modifying connection APP, set the delay recording, DV recording time and delay mismatch APP     SJCAM M10+ Plus 2K Gyro Firmware   Link coming soon……. Currently being updated.   V1.4 1, Gyro Sensor (image stabilization feature) is disabled by default 2, reduce the contrast daytime video and pictures 3, improves low-light pictures have dots issues. ————————————————– ——————————- ————————————————– ——————————- V1.3 1. Continuous function optimization: Adds 30fps option; CS indicator increased when prompted; Change English OSD “Sequence” as “Burst Mode”; Photos do not have time to repair burst watermark problems; 2, increase video resolution VGA @ 240FPS 3, increasing slow video features: Slow video options menu to add, you can choose -2X, -4X, -8X 4, repair BUG Modify WIFI connection will not automatically shut down when the low battery problems; Modify the English OSD “stabilization” as “Burst Mode”, “anti-shake” for the “gyroscope stabilization”; When modifying connection APP, WIFI probability time watermark picture has broken then crash problem; When modifying connection APP, set the delay recording, DV recording time and delay mismatch APP ————————————————– ——————————- ————————————————– ——————————- V1.2: 1, change the LOGO M10 + 2, increasing rotation 3, to improve software stability ————————————————– ——————————- ————————————————– ——————————- V1.1: 1, to optimize the effect of open anti-shake function 2, the anti-shake function default opens. Note: When you turn on image stabilization angle of view will be smaller, it will increase the power consumption. 3, modify the default time is 2015.01.01 ————————————————–   Feel free to email us at tony@sjcamhd.com if you have any issues with firmware or other suggestions. Best Regards,   – SJCAM Team